2013

List of Prompts
The following prompts are displayed.
Specify center point or [
3P (page 1099)/2P (page 1099)/TTR (page
1099)]: Specify a point (1) or enter an option
When you specify the center point, the torus is positioned so that its central
axis is parallel to the Z axis of the current user coordinate system (UCS). The
torus is parallel to and bisected by the XY plane of the current workplane.
Specify
radius (page 1099) or [diameter (page 1100)] <default>:
Specify a distance or enter d
3P (Three Points)
Defines the circumference of the torus with three points that you specify. The
three specified points also define the plane of the circumference.
2P (Two Points)
Defines the circumference of the torus with two points that you specify. The
plane of the circumference is defined by the Z value of the first point.
TTR (Tangent, Tangent, Radius)
Defines the torus with a specified radius tangent to two objects. The specified
tangency points are projected onto the current UCS.
Radius
Defines the radius of the torus: the distance from the center of the torus to
the center of the tube. A negative radius creates a solid shaped like an American
football.
Radius Defines the radius of the tube.
T Commands | 1099