2013

Direction Begins the arc tangent to a specified direction. It creates any arc,
major or minor, clockwise or counterclockwise, beginning with the start point
(1), and ending at an endpoint (2). The direction is determined from the start
point.
Specify tangent direction for the start point of arc:
Radius Draws the minor arc counterclockwise from the start point (1) to the
endpoint (2). If the radius is negative, the major arc is drawn.
Specify radius of arc:
Center
Specifies the center of the circle of which the arc is a part.
Specify center point of arc:
Specify start point of arc:
Specify end point of arc or [Angle/chord Length]:
End Point Draws an arc counterclockwise from the start point (2) to an
endpoint that falls on an imaginary ray drawn from the center point (1)
through a specified point (3).
A Commands | 77