2013

Current Material Sets the material of new objects. (CMATERIAL (page 1230)
system variable)
Current Lineweight Sets the lineweight of new objects. (CELWEIGHT (page
1225) system variable)
Current Plot Style Sets the current plot style of new objects. (CPLOTSTYLE
(page 1240) system variable)
Current Elevation Stores the current elevation of new objects relative to the
current UCS. (ELEVATION (page 1321) system variable)
Thickness Sets the current 3D thickness. (
THICKNESS (page 1510) system
variable)
Fill, Grid, Ortho, Qtext, Snap, Tablet Shows whether these modes are on or
off.
Object Snap Modes Lists the running object snap modes. (OSNAP (page 747)
command)
See also:
Obtain General Drawing Information
STLOUT
Stores solids in an ASCII or binary file.
Summary
The
FACETRES (page 1333) system variable determines how the solid is
triangulated. A higher value creates a finer mesh that more accurately
represents the model. This also results in a much larger file.
Select solids or watertight meshes
You can select blocks or external references (xrefs) that contain solids or
watertight meshes. Only solids and watertight meshes of the selected blocks
of xrefs are included in the STL file. All other geometry is discarded.
Create a binary STL file? [Yes/No] <Yes>: To create a STL file,
enteryor press Enter. To create an ASCII file, entern
The
Create STL File dialog box (page 1038) displays.
The file is created with the .stl file name extension. The STL file format is
compatible with stereolithography apparatus (SLA). The solid data is transferred
S Commands | 1037