2013

Undo
Undo
Undoes the editing action.
Exit
Exit
Exits the SOLIDEDIT command.
See also:
Clean and Check 3D Solids
SOLPROF
Creates 2D profile images of 3D solids for display in a layout viewport.
Access Methods
Menu: Draw  3D Modeling  Setup  Profile
Summary
The selected 3D solids are projected onto a 2D plane parallel with the current
layout viewport. The resulting 2D objects are generated on separate layers for
hidden and visible lines and are displayed only in that viewport.
List of Prompts
The following prompts are displayed.
Select objects: Use an object selection method
Display hidden profile lines on separate layer? [
Yes (page
1007)/
No (page 1008)] <Y>: Enteryorn, or press Enter
Yes Generates only two blocks: one for the visible lines and one for the hidden
lines of the entire selection set. When you generate hidden lines, solids can
partially or completely hide other solids. The visible profile block is drawn in
the BYLAYER linetype, and the hidden profile block is drawn in the HIDDEN
linetype (if loaded). The visible and hidden profile blocks are placed on
uniquely named layers using the following naming conventions:
PV-viewport handle for the visible profile layer
S Commands | 1007