2013

 Reference (page 998)
Xaxis, Yaxis, Zaxis Aligns the axis of rotation with the axis (X, Y, or Z) that
passes through the selected point.

Origin of rotation (page 998)
Rotation angle (page 998)

Reference (page 998)
Origin of rotation Sets the point of rotation.

Rotation angle (page 998)

Reference (page 998)
Rotation angle Rotates the object about the selected axis the specified amount
from the current orientation.
Reference Specifies the reference angle and the new angle.
 Reference (starting) angle. Sets the start point for the angle.
 Ending angle. Sets the endpoint for the angle. The difference between
the starting angle and the ending angle is the computed rotation angle.
Face: Offset
Offset Offsets faces equally by a specified distance or through a specified point.
A positive value increases the size or volume of the solid. A negative value
decreases the size or volume of the solid.

Select faces (offset) (page 998)

Undo (page 992)

Remove (page 992)

All (page 993)
Select faces (offset) Specifies the faces you want to offset.
NOTE The size of holes inside a solid object that is offset decreases as the volume
of the solid increases.
998 | Chapter 2 Commands