2013

Select faces Specifies the face to be moved.
 Base point of displacement. Sets the base point for the move. If you
specify a single point, usually entered as a coordinate, and then press Enter,
the coordinate is used as the new location.
 Second point of displacement. Sets a displacement vector that indicates
how far the selected face is moved and in what direction.
Face: Rotate
Rotate Rotates one or more faces or a collection of features on a solid about
a specified axis.
You can change the shape of the object by rotating its faces. This option is
recommended for minor adjustments.

Select faces (rotate) (page 996)
 Undo. Cancels selection of the faces that you selected most recently.

Remove (page 992)

All (page 993)
Select faces (rotate) Rotates the face according to the specified angle and axis.
In the drawing area, select one or more faces.

Axis point (page 996)

Axis by object (page 997)

View (page 997)

Xaxis, Yaxis, Zaxis (page 998)

2Point (page 996)
Axis point, 2Point Sets two points to define the axis of rotation.
996 | Chapter 2 Commands