2013

Table Of Contents

Calculates the maximum and minimum ranges of all objects selected for

curvature analysis (

VSACURVATUREHIGH (page 1540) and VSACURVATURELOW

(page 1541) system variables).

Clear Curvature Analysis

Removes the curvature analysis display from all objects in the current drawing.

See also:

Analyze Surfaces

Draft Angle Tab (Analysis Options Dialog Box)

Changes the display settings for the ANALYSISDRAFT command.

List of Options

The following options are available.

Select objects to analyze

Prompts you to select the surface objects to analyze. When you are done

selecting objects, press Enter to return to the dialog box.

Color Mapping

Maps green to the highest draft angle, red to the medium draft angle, and

blue to the lowest draft angle.

Angle Sets the value for the high and low draft angles. The draft angle is the

angle in degrees between the surface normal and the UCS plane.

Enter a value for the highest angle allowed (

VSADRAFTANGLEHIGH (page

1542)). When the object’s angle reaches this value, it displays in green.

Displays the average value of the high and low angles. When the object’s angle

reaches this value, it displays in red.

Enter a value for the lowest angle allowed (VSADRAFTANGLELOW (page 1542)).

When the object’s angle reaches this value, it displays in blue.

Clear Draft Angle Analysis

Removes the curvature analysis display from all objects in the current drawing.