2012
Table Of Contents
- Contents
- Basic Customization
- Custom Linetypes
- Custom Hatch Patterns
- User Interface Customization
- DIESEL
- Command Scripts
- Introduction to Programming Interfaces
- Shapes and Shape Fonts
- Overview of Shape Files
- Create Shape Definition Files
- Shape Descriptions
- Vector Length and Direction Code
- Special Codes
- Use Special Codes
- Codes 0, 1, and 2: End of Shape and Draw Mode Control
- Codes 3 and 4: Size Control
- Codes 5 and 6: Location Save/Restore
- Code 7: Subshape
- Codes 8 and 9: X-Y Displacements
- Code 00A: Octant Arc
- Code 00B: Fractional Arc
- Codes 00C and 00D: Bulge-Specified Arcs
- Code 00E: Flag Vertical Text Command
- Text Font Descriptions
- Sample Files
- Big Font Descriptions
- Unicode Font Descriptions
- Superscripts and Subscripts in SHX Files
- Index
- (subtraction)
Returns the result of subtracting the numbers val2 through val9 from val1.
$(-, val1 [, val2 , …, val9])
* (multiplication)
Returns the result of multiplying the numbers val1, val2, …, val9.
$(*, val1 [, val2, …, val9])
/ (division)
Returns the result of dividing the number val1 by val2, …, val9.
$(/, val1 [, val2, …, val9])
= (equal to)
If the numbers val1 and val2 are equal, the string returns 1; otherwise, it returns
0.
$(=, val1, val2)
< (less than)
If the number val1 is less than val2, the string returns 1; otherwise, it returns
0.
$(<, val1, val2)
The following expression gets the current value of HPANG; if the value is less
than the value stored in the system variable USERR1, it returns 1. If the value
10.0 is stored in USERR1 and the current setting of HPANG is 15.5, the
following string returns 0.
$(<, $(getvar,hpang),$(getvar,userr1))
Catalog of DIESEL Functions | 65