2012

 Rotation angle (page 964)

Reference (page 964)
Xaxis, Yaxis, Zaxis Aligns the axis of rotation with the axis (X, Y, or Z) that
passes through the selected point.
 Origin of rotation

Rotation angle (page 964)

Reference (page 964)
Origin of rotation Sets the point of rotation.

Rotation angle (page 964)

Reference (page 964)
Rotation angle Rotates the object about the selected axis the specified amount
from the current orientation.
Reference Specifies the reference angle and the new angle.
 Reference (starting) angle. Sets the start point for the angle.
 Ending angle. Sets the endpoint for the angle. The difference between
the starting angle and the ending angle is the computed rotation angle.
Face: Offset
Offset Offsets faces equally by a specified distance or through a specified point.
A positive value increases the size or volume of the solid. A negative value
decreases the size or volume of the solid.

Select faces (offset) (page 964)

Undo (page 958)

Remove (page 958)

All (page 959)
A positive value increases the size of the 3D solid, a negative value decreases
the size. Adjacent faces are stretched but maintain their angles relative to the
offset face.
Select faces (offset) Specifies the faces you want to offset.
NOTE
The size of holes inside a solid object that is offset decreases as the volume of
the solid increases.
964 | Chapter 2 Commands