2012

Select objects to analyze
Prompts you to select the surface objects to analyze. When you are done
selecting objects, press Enter to return to the dialog box.
Color Mapping
Maps green to the highest draft angle, red to the medium draft angle, and
blue to the lowest draft angle.
Angle Sets the value for the high and low draft angles. The draft angle is the
angle in degrees between the surface normal and the UCS plane.
Enter a value for the highest angle allowed (VSADRAFTANGLEHIGH (page
1493)). When the object’s angle reaches this value, it displays in green.
Displays the average value of the high and low angles. When the object’s angle
reaches this value, it displays in red.
Enter a value for the lowest angle allowed (
VSADRAFTANGLELOW (page 1494)).
When the object’s angle reaches this value, it displays in blue.
Clear Draft Angle Analysis
Removes the curvature analysis display from all objects in the current drawing.
See also:
Analyze Surfaces
ANALYSISZEBRA
Projects stripes onto a 3D model to analyze surface continuity.
Access Methods
Button
Toolbar: Modeling tool set  Analysis tool group  Surface Analysis
flyout  Zebra Analysis
Summary
The way the stripes line up where two surfaces meet, helps analyze the
tangency and curvature of the intersection.
Commands | 67