2012

Select objects to analyze
Prompts you to select the surface objects to analyze. When you are done
selecting objects, press Enter to return to the dialog box.
Color Mapping
Display Style
Specifies the display for color mapping (
VSACURVATURETYPE (page 1492)
system variable).
Enter the maximum curvature value (VSACURVATUREHIGH (page 1492)
system variable). When the surface curvature reaches this value, it displays as
green.
Enter the minimum curvature value (
VSACURVATURELOW (page 1492) system
variable). When the surface curvature reaches this value, it displays as blue.
Auto Range
Calculates the curvature range so that 80% of the values are within the high
and low range (
VSACURVATUREHIGH (page 1492) and VSACURVATURELOW
(page 1492) system variables).
Max Range
Calculates the maximum and minimum ranges of all objects selected for
curvature analysis (
VSACURVATUREHIGH (page 1492) and VSACURVATURELOW
(page 1492) system variables).
Clear Curvature Analysis
Removes the curvature analysis display from all objects in the current drawing.
See also:
Analyze Surfaces
Draft Angle Tab (Analysis Options Dialog Box)
Changes the display settings for the ANALYSISDRAFT command.
List of Options
The following options are available.
66 | Chapter 2 Commands