2012

List of Options
The following options are displayed.
Select Objects to Analyze
Prompts you to select the surface objects to analyze. When you are done
selecting objects, press Enter to return to the dialog box.
Stripe Display
Stripe Direction
Specifies the display angle. (
VSAZEBRADIRECTION (page 1495)) This option is
only available when Type is set to Cylinder. If you are using the Chrome Ball
type, change the stripe directions with the VSAZEBRADIRECTION (page 1495)
system variable.
Type
Sets analysis display type. (
VSAZEBRATYPE (page 1496))
Size
Sets the width of the zebra stripes. (VSAZEBRASIZE (page 1496))
Color 1
Sets the first color for zebra stripes. (VSAZEBRACOLOR1 (page 1494))
Color 2
Sets the second color for zebra stripes. (
VSAZEBRACOLOR2 (page 1495))
Clear Zebra Analysis
Removes the zebra display from all objects in the current drawing.
See also:
Analyze Surfaces
Curvature Tab (Analysis Options Dialog Box)
Changes the display settings for the ANALYSISCURVATURE command.
List of Options
The following options are displayed.
Commands | 65