2012

Sides Specifies the number of sides for the pyramid. You can enter a number
from 3 to 32.
Specify number of sides <default>: Specify a diameter or press Enter to specify
the default value
Initially, the number of sides for the pyramid is set to 4. During a drawing
session, the default value for the number of sides is always the previously
entered value for the number of sides.
Inscribed Specifies that the base of the pyramid is inscribed within (drawn
within) the base radius of the pyramid.
Circumscribed Specifies that the pyramid is circumscribed around (drawn
around) the base radius of the pyramid.
2Point Specifies that the height of the pyramid is the distance between two
specified points.
Specify first point: Specify a point
Specify second point: Specify a point
Axis Endpoint Specifies the endpoint location for the pyramid axis. This
endpoint is the top of the pyramid. The axis endpoint can be located anywhere
in 3D space. The axis endpoint defines the length and orientation of the
pyramid.
Specify axis endpoint: Specify a point
Top Radius Specifies the top radius of the pyramid, creating a pyramid frustum.
Specify top radius: Enter a value
Initially, the default top radius is not set to any value. During a drawing session,
the default value for the top radius is always the previously entered top radius
value for any solid primitive.
Specify height or [2Point (Two Points)/Axis Endpoint] <default>: Specify a
height, enter an option, or press Enter to specify the default height value
 2Point. Specifies that the height of the pyramid is the distance between
two specified points.
Specify first point: Specify a point
Specify second point: Specify a point
 Axis Endpoint. Specifies the endpoint location for the pyramid axis. This
endpoint is the top of the pyramid. The axis endpoint can be located
anywhere in 3D space. The axis endpoint defines the length and orientation
of the pyramid.
Specify axis endpoint: Specify a point
852 | Chapter 2 Commands