2012

You can specify a single point, indicating the relative displacement of the
drawing with respect to the current location, or (more commonly) you can
specify two points, in which case the displacement is computed from the first
point to the second point.
If you press Enter, the drawing is moved by the amount you specified in the
Specify Base Point or Displacement prompt. For example, if you specify 2,2
at the first prompt and press Enter at the second prompt, the drawing is moved
2 units in the X direction and 2 units in the Y direction. If you specify a point
at the Specify Second Point prompt, the location of the first point is moved
to the location of the second point.
You cannot use PAN transparently during VPOINT (page 1114) or DVIEW (page
385), or while another
ZOOM (page 1153), PAN, or VIEW (page 1104) command is
in progress.
See also:
Pan or Zoom a View
Pan Shortcut Menu
Pan and Zoom shortcut menu allows for switching between navigation tools
and cancelling the current navigation tool.
To access the Pan shortcut menu, right-click in the drawing area while PAN
is active.
List of Options
The following options are displayed.
Exit Cancels PAN or ZOOM.
Pan Switches to PAN.
Zoom Switches to ZOOM in real time.
Commands | 765