2012

Summary
Starts 3D Orbit view and uses a center of rotation that you specify with your
pointing device. If you specify a point outside the current view, 3DORBITCTR
ignores the specified point and uses the default center of rotation.
3DORBITCTR overrides the AutoTarget option in the
3DORBIT (page 40)
command.
See also:
Use 3D Navigation Tools
3DOSNAP
Sets the object snap modes for 3D objects.
Access Methods
Menu: Tools  Drafting Settings
Shortcut menu: Press Option while right-clicking in the drawing area and
click 3D Osnap  Osnap Settings.
Toolbar: Status bar (expanded)  3D Object Snap
Summary
Displays the 3D Object Snap tab of the
Drafting Settings dialog box (page 364).
You can also set the 3D object snap settings with the
3DOSMODE (page 1165)
system variable.
NOTE
Because 3D object snaps can slow performance, select only the object snaps
you need.
See also:
Create Solids and Surfaces from Lines and Curves
Create Solids
Create Surfaces
Modify Surfaces
44 | Chapter 2 Commands