2012

First corner / Corner Sets the first corner of the mesh box.
 Other corner. Sets the opposite corner of the mesh box.

Cube (page 618)

Length (page 618)
Center Sets the center of the mesh box.
 Corner. Sets the opposite corner of the mesh box.
 Cube (page 618)

Length (page 618)
Cube Sets all edges of the box to be of equal length.

Length (page 618)
Length Sets the length of the mesh box along the X axis.

Width (page 618) (not available for cubes)
Width Sets the width of the mesh box along the Y axis.

Height (page 618)

2Point (height) (page 618)
Height Sets the height of the mesh box along the Z axis.
2Point (height) Sets the height based on the distance between two points:
 First point. Sets the first point of a two-point distance.
 Second point. Sets the second point of a two-point distance.
Cone
Creates a 3D mesh with a circular or elliptical base that tapers symmetrically
to a point or to a planar face.
618 | Chapter 2 Commands