2012

LIMITS
Sets and controls the limits of the grid display in the current Model or named
layout.
Access Methods
Menu: Format  Drawing Limits
Command entry: 'limits for transparent use
List of Prompts
The following prompts are displayed.
Specify lower left corner (page 573)or [ON (page 573)/OFF (page
573)] <current>: Specify a point, enter on or off, or press Enter
Lower-Left Corner Specifies the lower-left corner for the grid limits.
On Turns on limits checking. When limits checking is on, you cannot enter
points outside the grid limits. Because limits checking tests only points that
you enter, portions of objects such as circles can extend outside the grid limits.
Off Turns off limits checking but maintains the current values for the next
time you turn on limits checking.
See also:
Adjust Grid and Grid Snap
LINE
Creates straight line segments.
Commands | 573