2012

Hatch Color
Overrides the current color with a specified color for hatch patterns and solid
fills. The color value is stored in the
HPCOLOR (page 1321) system variable.
When Hatch Type is set to Pattern, you can also specify a new background
color. The background color value is stored in the HPBACKGROUNDCOLOR
(page 1320) system variable.
To set the hatch color back to the current color for objects, enter “.” or Use
Current. To turn off the background color, enter “.” or none.
Default object color Enter the color number (1 through 255) or the color
name (the names for the first seven colors). For example, you can specify the
color red by entering the ACI (AutoCAD Color Index) number 1 or the ACI
name red. You can also set the hatch color to ByLayer or ByBlock.
Truecolor Specify an RGB color expressed as values from 0 to 255, such as
210,155,95.
Colorbook Specify a custom color from a color book installed on your system.
Layer
Assigns new hatch objects to the specified layer, overriding the current layer.
Enter Use Current or “.” to use the current layer.
Transparency
Sets the transparency level for new hatches or fills, overriding the current
object transparency. Enter Use Current or “.” to use the current object
transparency setting.
See also:
Modify Hatches and Fills
HATCHGENERATEBOUNDARY
Creates a non-associated polyline around a selected hatch.
Access Methods
Shortcut menu: Select a hatch object. Right-click and choose Generate
Boundary.
Summary
Creates a new non-associative polyline boundary around the selected hatch.
500 | Chapter 2 Commands