2012

Additional Format Displays the Additional Format dialog box (page 1034).
See also:
Use Fields in Text
FILL
Controls the filling of objects such as hatches, 2D solids, and wide polylines.
List of Prompts
The following prompts are displayed.
Enter mode [ON (page 431)/OFF (page 431)] <current>: Enter on or
off, or press Enter
On Turns on Fill mode. For the filling of a 3D object to be visible, its extrusion
direction must be parallel to the current viewing direction, and hidden lines
must not be suppressed.
Off Turns off Fill mode. Only the outlines of objects are displayed and plotted.
Changing Fill mode affects existing objects after the drawing is regenerated.
The display of lineweights is not affected by the Fill mode setting.
See also:
Control the Display of Polylines, Hatches, Gradient Fills, Lineweights, and
Text
Commands | 431