2012

Specify second angle endpoint <next>: Specify an object snap location or press
Enter to skip to the next dimension object, if any
Angular (Two Line) Select first line <next>: Select a line, or press Enter to skip
to the next prompt
Select second line <next>: Select another line, or press Enter to skip to the next
dimension object, if any
Diameter Select arc or circle <next>: Select an arc or a circle, or press Enter to
skip to the next dimension object, if any
Leader Specify leader association point <next>: Specify an object snap location,
or press Enter to skip to the next dimension object, if any
Ordinate Specify feature location <next>: Specify an object snap location, or
press Enter to skip to the next dimension object, if any
Radius Select arc or circle <next>: Select an arc or a circle, or press Enter to skip
to the next dimension object, if any
NOTE DIMREASSOCIATE does not change the setting of DIMLFAC (page 1234) in
a dimension. Use
DIMOVERRIDE (page 306) to clear dimension linear factors in
legacy drawings.
See also:
Change Dimension Associativity
DIMREGEN
Updates the locations of all associative dimensions.
Summary
The locations of all associative dimensions in the current drawing are updated.
Associative dimensions need to be updated manually with DIMREGEN in the
following cases:
 After panning or zooming with a wheel mouse in a layout with model
space active; update associative dimensions created in paper space.
 After opening a drawing containing external references that are
dimensioned in the current drawing; update associative dimensions if the
associated external reference geometry has been modified.
310 | Chapter 2 Commands