2012

Autoconstrain Headings
 Applied — Controls the constraints that are applied when applying
constraints to multiple objects.
 Constraint Type — Controls the type of constraint applied to objects.
Tolerances Sets the acceptable tolerance values to determine whether a
constraint can be applied.
 Distance — Distance tolerance are applied to coincident, concentric,
tangent, and collinear constraints.
 Angle — Angular tolerance are applied to horizontal, vertical, parallel,
perpendicular, tangent, and collinear constraints.
Tangent Objects Must Share an Intersection Point Specifies that two curves
must share a common point (as specified within the distance tolerance) for
the tangent constraint to be applied.
Perpendicular Objects Must Share an Intersection Point Specifies that lines
must intersect or the endpoint of one line must be coincident with the other
line or endpoint of the line as specified within the distance tolerance.
See also:
Overview of Constraints
+CONSTRAINTSETTINGS
Controls the tab that is displayed by default when the Constraint Settings
dialog box is invoked.
Tab DisplayedTab Index
Geometric tab0
Dimensional tab1
AutoConstrain tab2
See also:
Overview of Constraints
Commands | 215