2012

RegistrySaved in:
6Initial value:
Valid values are from 2 to 32767.
See also:
CVREBUILD (page 243)
Rebuild NURBS Surfaces and Curves
REBUILD2DDEGREE
Sets the global degree when rebuilding a spline.
IntegerType:
RegistrySaved in:
3Initial value:
Valid values are 1 to 11.
A curve with a degree of 1 is a straight line and a curve with a degree of 2 has
one bend. A Bezier curve has a degree of 3. Higher degrees create more complex
curves, but require computations.
See also:
CVREBUILD (page 243)
Rebuild NURBS Surfaces and Curves
REBUILD2DOPTION
Controls whether to delete the original curve when rebuilding a spline.
1414 | Chapter 4 System Variables