2012

linetype, the dash lengths of a line in a viewport are the same as
the dash lengths of a line in paper space. You can still control the
dash lengths with LTSCALE
When you change PSLTSCALE or use a command such as
ZOOM (page 1153)
with PSLTSCALE set to 1, objects in viewports are not automatically regenerated
with the new linetype scale. Use the REGEN (page 877) or REGENALL (page
877) command to update the linetype scales in each viewport.
See also:
Scale Linetypes in Layout Viewports
PSOLHEIGHT
Controls the default height for a swept solid object created with the
POLYSOLID command.
RealType:
DrawingSaved in:
4.0000 (imperial) or 80.0000 (metric)Initial value:
The value reflects the last entered height value when using the
POLYSOLID
(page 823) command. You cannot enter 0 as the value.
See also:
Create a 3D Solid from a Polyline
PSOLWIDTH
Controls the default width for a swept solid object created with the POLYSOLID
command.
RealType:
DrawingSaved in:
0.2500 (imperial) or 5.0000 (metric)Initial value:
The value reflects the last entered height value when using the
POLYSOLID
(page 823) command. You cannot enter 0 as the value.
System Variables | 1409