2012

0Initial value:
Doubling specifies a second set of lines drawn at 90 degrees to the original
lines.
Turns off hatch pattern doubling0
Turns on hatch pattern doubling1
See also:
Choose a Hatch Pattern or Fill
HPDRAWORDER
Controls the draw order of hatches and fills.
IntegerType:
Not-savedSaved in:
3Initial value:
Controls whether hatch and fill objects are displayed in front or behind all
other objects, or in front or behind their associated boundaries.
None. The hatch or fill is not assigned a draw order.0
Send to back. The hatch or fill is sent to the back of all other objects.1
Bring to front. The hatch or fill is brought to the front of all other
objects.
2
Send behind boundary. The hatch or fill is sent behind the hatch’s
boundary objects.
3
Bring in front of boundary. The hatch or fill is brought in front of
the hatch’s boundary objects.
4
See also:
Set Property Overrides for Hatches and Fills
System Variables | 1323