2012

Also sets the gap between annotation and a hook line created with the LEADER
command. If you enter a negative value, DIMGAP places a box around the
dimension text.
DIMGAP is also used as the minimum length for pieces of the dimension line.
When the default position for the dimension text is calculated, text is
positioned inside the extension lines only if doing so breaks the dimension
lines into two segments at least as long as DIMGAP. Text placed above or
below the dimension line is moved inside only if there is room for the
arrowheads, dimension text, and a margin between them at least as large as
DIMGAP: 2 * (
DIMASZ (page 1222) + DIMGAP).
See also:
Control the Location of Dimension Text
DIMJOGANG
Determines the angle of the transverse segment of the dimension line in a
jogged radius dimension.
RealType:
DrawingSaved in:
45Initial value:
Jogged radius dimensions are often created when the center point is located
off the page. Valid settings range is 5 to 90.
See also:
Create Radial Dimensions
DIMJUST
Controls the horizontal positioning of dimension text.
IntegerType:
DrawingSaved in:
0Initial value:
Positions the text above the dimension line and center-justifies it
between the extension lines
0
System Variables | 1233