2012

List of Options
The following options are displayed.
Name
Identifies the DWG you have selected to attach.
Browse
Displays the Select Reference File dialog box (a
standard file selection dialog
box
(page 720)), in which you can select a new external reference for the current
drawing.
Reference Type
Specifies whether the external reference is an attachment or an overlay. Unlike
an xref that is an attachment, an overlay is ignored when the drawing to
which it is attached is then attached as an xref to another drawing.
See Attach Drawing References (Xrefs) and Nest and Overlay Referenced
Drawings.
Preview
Displays the DWG you have selected to attach.
Insertion Point
Specify On-Screen Allows you to input at the Command prompt or the
pointing device.
X Sets the X coordinate value.
Y Sets the Y coordinate value.
Z Sets the Z coordinate value.
Scale
Specify On-screen Allows you to input at the Command prompt or the
pointing device.
X Sets the X scale factor.
Y Sets the Y scale factor.
Z Sets the Z scale factor.
Uniform Scale Sets the Y and X scale factors as the same as Z.
Rotation
Specify on-screen If Specify On-Screen is selected, you may wait until you
exit the dialog box to rotate the object with your pointing device or at the
Command prompt.
Commands | 1139