2012

X
Specifies the X coordinate value for the base point.
Y
Specifies the Y coordinate value for the base point.
Z
Specifies the Z coordinate value for the base point.
Extended Options
Blocks Unit
Specifies the unit value to be used for automatic scaling when the new file is
inserted as a block in a drawing that uses different units. Select Unitless if you
do not want to automatically scale the drawing when you insert it. See
IN-
SUNITS
(page 1335).
See also:
Create Drawing Files for Use as Blocks
-WBLOCK
Saves selected objects or converts a block to a specified drawing file.
Summary
If
FILEDIA (page 1296) is set to 1, entering -wblock at the Command prompt
displays a standard file selection dialog box in which to specify a name for
the new drawing file. If FILEDIA is set to 0, entering -wblock at the Command
prompt displays a prompt. The new drawing is saved in the file format that
is specified in Save As on the Open and Save tab in the Options dialog box.
After the file is created, the selected objects are deleted from the drawing. You
can use OOPS (page 719) to restore the objects.
In the new drawing, the world coordinate system (WCS) is set parallel to the
user coordinate system (UCS).
List of Prompts
The following prompts are displayed.
Enter name of output file:
Enter name of existing block or
Commands | 1129