2011

A new panel (named Panel1) is created. The default name changes based
on the number of panels you previously created.
5 Enter a name for the new tool group.
The name entered is displayed on the title bar of the tool group when it
is expanded.
6 In the Commands list, drag a command to the new tool group.
7 Release the button on the pointer device when the tool group or flyout
is highlighted, or the desired location is indicated by a horizontal line.
For information about creating a command, see
Create, Edit, and Reuse
Commands
on page 44.
To create a flyout
1 At the Command prompt, enter cui and press Enter.
2 In the Customize dialog box, Tool Sets tab, Tool Sets list, expand the tool
set and then the tool group you want to add a flyout to.
3 Select the command or flyout you want to insert the new flyout after.
4 Click the Create Tool Set Element (+) button below the Tool Sets list and
click Add Drop-down.
A new flyout (named Drop-down1) is created. The default name changes
based on the number of flyouts you previously created.
5 Enter a name for the new flyout.
The name entered is not displayed on the Tool Sets palette.
6 In the Commands list, drag a command to the new flyout.
7 Release the button on the pointer device when the flyout is highlighted,
or the desired location is indicated by a horizontal line.
For information about creating a command, see
Create, Edit, and Reuse
Commands
on page 44.
To add a command to a tool group or flyout
1 At the Command prompt, enter cui and press Enter.
2 In the Customize dialog box, click Tool Sets tab.
3 In the Commands list, drag a command to the tool group or flyout which
you want to add a command.
Tool Sets | 67