2011

To reposition a pull-down menu, sub-menu, command, or separator
1 At the Command prompt, enter cui and press Enter.
2 In the Customize dialog box, Menus tab, Menus list, select a menu,
sub-menu, command, or separator item to reposition.
3 Click and drag the selected item to its new location in the Menus list.
4 Release the button on the pointer device when the menu or sub-menu
is highlighted, or the desired location for the command is indicated by
a horizontal line.
Quick Reference
Commands
CUI
Manages the customized user interface elements in the product.
Tool Sets
You can customize the Tool Sets palette by creating and modifying tool sets
and tool groups.
Overview of Tool Sets and Tool Groups
Tool Sets are made up of tool groups that contain tools. A tool can be either
a command or flytout (also known as a drop-down). Tool sets are accessed
from the Tool Sets palette. Each tool group is a maximum of two tools wide
and has two different display states: collapsed and expanded.
Position the cursor over a tool on the Tool Sets palette and click to use it. If
the tool is a flyout (or drop-down), click and hold the button on the pointer
device, and release over the tool you want to use.
Tools are not the only interactions that you will interact on the Tool Sets
palette. When the cursor is positioned over a tool group, a disclosure triangle
might appear that indicates the tool group can be expanded. Click the
disclosure triangle to expand the panel to access additional tools. After a tool
group is expanded, click the Lock icon to keep the tool group from collapsing.
64 | Chapter 4 User Interface Customization