2011
Table Of Contents
- Contents
- Basic Customization
- Custom Linetypes
- Custom Hatch Patterns
- User Interface Customization
- DIESEL
- Command Scripts
- Introduction to Programming Interfaces
- Shapes and Shape Fonts
- Overview of Shape Files
- Create Shape Definition Files
- Shape Descriptions
- Vector Length and Direction Code
- Special Codes
- Use Special Codes
- Codes 0, 1, and 2: End of Shape and Draw Mode Control
- Codes 3 and 4: Size Control
- Codes 5 and 6: Location Save/Restore
- Code 7: Subshape
- Codes 8 and 9: X-Y Displacements
- Code 00A: Octant Arc
- Code 00B: Fractional Arc
- Codes 00C and 00D: Bulge-Specified Arcs
- Code 00E: Flag Vertical Text Command
- Text Font Descriptions
- Sample Files
- Big Font Descriptions
- Unicode Font Descriptions
- Superscripts and Subscripts in SHX Files
- Index
Quick Reference
Commands
FILL
Controls the filling of objects such as hatches, 2D solids, and wide polylines.
HATCH
Fills an enclosed area or selected objects with a hatch pattern, solid fill, or
gradient fill.
HATCHEDIT
Modifies an existing hatch or fill.
SOLID
Creates solid-filled triangles and quadrilaterals.
System Variables
FILLMODE
Specifies whether hatches and fills, 2D solids, and wide polylines are filled
in.
HPANG
Sets the angle for new hatch patterns.
HPBOUND
Controls the object type created by HATCH and BOUNDARY.
HPDOUBLE
Specifies hatch pattern doubling for user-defined patterns.
HPNAME
Sets the default hatch pattern name.
HPSCALE
Sets the hatch pattern scale factor.
HPSPACE
Sets the hatch pattern line spacing for user-defined patterns.
40 | Chapter 3 Custom Hatch Patterns