2011

■ Specify a point on the current view plane. Sets a point on the object to
start the slice.
■
Point on desired side
■ Keep both sides
XY Aligns the cutting plane with the XY plane of the current user coordinate
system (UCS). Specifying a point defines the location of the cutting plane.
■ Point on the XY-plane. Sets the location of the slice.
■
Point on desired side
■ Keep both sides
YZ Aligns the cutting plane with the YZ plane of the current UCS. Specifying
a point defines the location of the cutting plane.
SLICE | 949