2011

List of Prompts
The following prompts are displayed.
Current positive angle in UCS: ANGDIR=current ANGBASE=current
Select objects: Use an object selection method and press Enter when you finish
Specify base point: Specify a point
Specify rotation angle or [Copy/Reference]: Enter an angle, specify a point, enter
c
, or enter r
Rotation Angle Determines how far an object rotates around the base point.
The axis of rotation passes through the specified base point and is parallel to
the Z axis of the current UCS.
Copy Creates a copy of the selected objects for rotation.
Reference Rotates objects from a specified angle to a new, absolute angle.
When you rotate a viewport object, the borders of the viewport remain parallel
to the edges of the drawing area.
ROTATE3D
Quick Reference
See also:
■ Rotate Objects
Moves objects about a 3D axis.
Summary
It is recommended that you use the gizmos available through the 3DMOVE
and 3DROTATE commands to manipulate 3D objects. For more information
about using gizmos, see Use Gizmos to Modify Objects.
902 | Chapter 18 R Commands