2011

Output Image Size (Pixels) List of commonly used output sizes. Choose
Custom to specify the output width and height for the image.
Width (Pixels) Sets the width resolution of the output image, in pixels.
The valid range for the width is 8 to 4096.
Height (Pixels) Sets the height resolution of the output image, in pixels.
The valid range for the height is 8 to 4096.
Aspect Ratio Sets the aspect ratio, the ratio of width to height, of the rendered
image.
Changing this value changes the Height value to maintain the correct
dimensions for the active resolution. The image aspect value is always expressed
as a multiplier value.
Lock Aspect Ratio Locks the aspect ratio when using a custom output
resolution.
When it is locked, the Width and Height spinners are locked to each other;
adjusting one alters the other to maintain the aspect-ratio value. When
unlocked, changes to either Width or Height affects only the Aspect Ratio
setting.
NOTE In viewports, the camera's frustum changes to reflect the image aspect
ratio you set in the Output Size dialog box. This change takes place when you exit
the dialog box.
-RENDEROUTPUTSIZE
Quick Reference
See also:
■ Save a Rendered Image
Specifies the image size to create when rendering a 3D model.
List of Prompts
The following prompts are displayed:
Enter render output width: Enter a width and press Enter
Enter render output height: Enter a height and press Enter
-RENDEROUTPUTSIZE | 889