2011

Table Of Contents
Prompts you to create multiline text (mtext) annotation.
Copy an Object
Prompts you to copy a multiline text, single-line text, tolerance, or block
reference object and connects the copy to the end of the leader line. The copy
is associated with the leader line, meaning that if the copied object moves,
the end of the leader line moves with it. The display of the hook line depends
on the object copied.
Tolerance
Displays the Tolerance dialog box, which you can use to create a feature control
frame to attach to the leader.
Block Reference
Prompts you to insert a block reference. The block reference is inserted at an
offset from the end of the leader line and is associated to the leader line,
meaning that if the block moves, the end of the leader line moves with it. No
hook line is displayed.
None
Creates a leader with no annotation.
MText Options
The options are available only when the multiline text annotation type is
selected.
Prompt for Width
Prompts you to specify the width of the multiline text annotation.
Always Left Justify
Left-justifies the multiline text annotation, regardless of leader location.
Frame Text
Places a frame around multiline text annotation.
Annotation Reuse
Sets options for reusing leader annotation.
None
Does not reuse leader annotation.
Reuse Next
Leader Settings Dialog Box | 853