2011

■ Limit the number of leader points
■ Constrain the angle of the first and second leader segments
You can use the
Leader Settings dialog box to customize the command so that
it prompts you for the number of leader points and the annotation type suited
to your drawing needs.
If associative dimensioning is turned on with DIMASSOC, the leader start
point can be associated with a location on an object. If the object is relocated,
the arrowhead remains attached to the object and the leader line stretches,
but the text or feature control frame remains in place.
List of Prompts
The following prompts are displayed.
Specify “first leader point”, or [“Settings”] <Settings>: Specify the first leader
point, or press Enter to specify leader settings
First Leader Point
The Number of Points setting on the Leader Line & Arrow tab of the
Leader
Settings dialog box
determines the number of leader points you are prompted
to specify.
Width If you set the text width value to 0.00, the width of the multiline text
is unlimited.
Tolerance If Tolerance is selected on the Annotation tab, the
Geometric
Tolerance dialog box
is displayed. Use the dialog box to create the tolerance
feature control frame.
Enter block name or [?]: Enter the name, or enter ? to display a list of blocks defined
in the drawing
Insertion Point For a description of the insertion options, see -INSERT on
page 520.
Settings
Displays the Leader Settings dialog box.
QLEADER | 851