2011

Select geometry to dimension: Select the objects you want to dimension or the
dimensions you want to edit and press Enter
Specify dimension line position, or
[
Continuous/Staggered/Baseline/Ordinate/Radius/Diameter/datumPoint/Edit/seTtings]
<current>: Enter an option or press Enter
Continuous Creates a series of continued dimensions.
Staggered Creates a series of staggered dimensions.
Baseline Creates a series of baseline dimensions.
Ordinate Creates a series of ordinate dimensions.
Radius Creates a series of radial dimensions.
Diameter Creates a series of diameter dimensions.
Datum Point Sets a new datum point for baseline and ordinate dimensions.
Edit Edits a series of dimensions. You are prompted to add or remove points
from existing dimensions.
Settings Sets the default object snap for specifying extension line origins.
QLEADER
Quick Reference
See also:
■ Create Leaders
■ Create and Modify Leaders
Creates a leader and leader annotation.
Summary
It is recommended that you use the workflow available through the
MLEADER
on page 652 command to create leader objects.
You can use QLEADER to
■ Specify leader annotation and annotation format
■ Set the location where leaders attach to multiline text annotation
850 | Chapter 17 Q Commands