2011

Summary
When more than one object is selected, only those properties common to all
selected objects are displayed. When no objects are selected, only the current
settings of general properties are displayed.
You can specify a new value to modify any property that can be changed.
Click the value and use one of the following methods:
■ Enter a new value.
■ Click the down arrow a the right and select a value from the list.
■ Click the Pick Point button to use the pointing device to change a
coordinate value.
■ Click the [ ] button and change the property value in a dialog box.
■ Select or clear a check box to toggle a property on or off.
■ Drag a slider left or right.
List of Options
The following options are displayed.
Current Displays the properties for the current drawing or selected objects.
Layer Displays the properties for the layer selected in the Layer list of the
Layers palette.
Object Type Displays the type of objects that are selected and filters which
objects you are modifying.
Essentials Displays the most commonly edited or viewed properties for the
current drawing or selected objects.
All Displays all the properties associated with the current drawing or the
selected objects.
Match Properties Applies the properties of a selected object to other objects.
Drawing/Objects/Layer Properties Displays a list of available properties that
can currently be edited. The list of properties show is based on the following
conditions:
■ No objects selected in the current drawing. Drawing specific properties are
displayed.
Properties Inspector Palette | 831