2011

List of Prompts
The following prompts are displayed.
Enter number of sides <current>: Enter a value between 3 and 1024 or press Enter
Specify center of polygon on page 820 or [Edge on page 821]: Specify a point (1)
or enter e
Center of Polygon
Defines the center of the polygon.
Enter an option [Inscribed in circle/Circumscribed about circle] <current>: Enter
i or c or press Enter
Inscribed in Circle Specifies the radius of a circle on which all vertices of the
polygon lie.
Specify radius of circle: Specify a point (2) or enter a value
Specifying the radius with your pointing device determines the rotation and
size of the polygon. Specifying the radius with a value draws the bottom edge
of the polygon at the current snap rotation angle.
Circumscribed about Circle Specifies the distance from the center of the
polygon to the midpoints of the edges of the polygon.
Specify radius of circle: Specify a distance
820 | Chapter 16 P Commands