2011

Plotted Inches = Drawing Units Calculates the plot scale based on the inches
or millimeters to drawing units that you specify. You can also enter a real
number as a fraction (for example, you can enter 1=2 or .5).
Fit Calculates the scale to fit the area on the sheet of paper.
The default scale setting is 1:1 when you are plotting a layout, unless you
modified and saved the setting. The default setting is Fit when plotting a
Model tab.
Enter plot offset (x, y) or [Center] <current>: Specify the plot offset in either the X
or Y direction, or enter c to center the plot on the paper
Plot with plot styles [Yes/No] <current>: Specify whether to plot using the plot
styles applied to objects and defined in the plot style table
If you specify Yes to plot with plot styles, the following prompt is displayed:
Enter plot style table name or [?] (enter . for none) <current>: Enter a plot style
table name, ? to view plot style tables, or . (period) for none
All style definitions with different property characteristics are stored in the
current plot style table and can be attached to the geometry. This setting
replaces pen mapping in earlier versions of the program.
Plot with lineweights [Yes/No] <current>:
Scale lineweights with plot scale [Yes/No] <current>:
NOTE The Scale Lineweights with Plot Scale prompt is displayed only when you
plot from a layout tab. Settings for the shaded plotting type are available only
when you plot from the Model tab. To control shaded plotting settings of viewports
in a layout tab, use the Shadeplot option of the -vports command when you
create a viewport.
Enter shade plot setting [As displayed/Wireframe/Hidden/Visual
styles/Rendered] <As displayed>: Enter a shade plot option
Specifies how model space views are plotted.
As Displayed Specifies that a model space view is plotted the same way it is
displayed.
Wireframe Specifies that a model space view is plotted in wireframe regardless
of display.
Hidden Specifies that a model space view is plotted with hidden lines removed
regardless of display.
-PLOT | 801