2011

Outputs any portion of the drawing that you specify. When you specify the
two corners of the area to output, the Window button becomes available.
Click the Window button to use the pointing device to specify the two corners
of the area to be outputted, or enter coordinate values.
Scale
Controls the relative size of drawing units to plotted units.
NOTE If the Layout option is specified in What to Print, the layout is plotted at
1:1 regardless of the setting specified in Scale.
Fit to Paper
Scales the plot to fit within the selected paper size and displays the custom
scale factor in the Scale, Inch =, and Units boxes.
Scale
Defines the exact scale for the output. Custom defines a user-defined scale. You
can create a custom scale by entering the number of inches (or millimeters)
equal to the number of drawing units.
NOTE You can modify the list of scales with SCALELISTEDIT.
Inch(es) =/mm =
Specifies the number of inches or millimeters equal to the specified number
of units.
Inch/mm
Specifies inches or mm for display of units. The default is based on the paper
size and changes each time a new paper size is selected.
Unit
Specifies the number of units equal to the specified number of inches or
millimeters.
Scale Lineweights
Scales lineweights in proportion to the plot scale. Lineweights normally specify
the linewidth of output objects and are output with the linewidth size
regardless of the scale.
Advanced
Displays the
Page Setup - Advanced dialog box on page 757 which allows you
to edit additional output options.
Print Dialog Box | 797