2011

If the selected output device does not support the layout's selected paper size,
a warning is displayed and you can select the device's default paper size or a
custom paper size.
Click the disclosure triangle to the right of the Printer drop-down list to expand
the Print dialog box. When the dialog box is expanded, additional settings
are available that allow you to control the printing of the layout.
Presets
Specifies the named print preset to use for printing the current layout.
Print presets store the following information:
■ Number of Copies
■ Collated
■ Two-sided
■ Paper size
■ Orientation
Copies
Specifies the number of copies to print. This option is not available when you
print to an electronic file, such as a PDF file.
Collated
Controls if multi-page prints should be collated.
Two-sided
Controls if multi-page prints should be printed on both sides of a page.
List of Options - Single Layout
The following options are available when printing a layout.
Paper Size
Displays standard paper sizes that are available for the selected output device.
If no output device is selected, the full standard paper size list is displayed and
available for selection.
If the selected printer does not support the selected paper size, a warning is
displayed, and you can select one of the available paper sizes.
The actual printable area of the page, which is determined by the selected
output device and paper size, is indicated in the layout by a dashed line.
If you are outputting a raster image, such as a BMP or TIFF file, the size of the
print is specified in pixels, not in inches or millimeters.
Print Dialog Box | 795