2011

Do you want it to turn into one? <Y>: Enter y or n, or press Enter
If you enter y, the object is converted into a single-segment 2D polyline that
you can edit. You can use this operation to join lines and arcs into a polyline.
Before the selected spline is converted to a polyline, the following prompt is
displayed:
Specify a precision <10>: Enter a new precision value or press Enter
The precision value determines how accurately the resulting polyline is to fit
to the source spline. Valid value is an integer between 0 and 99.
NOTE A high precision value may cause performance problems.
The
PLINECONVERTMODE on page 1443 system variable determines whether
the polylines are created with linear or arc segments. When the
PEDITACCEPT
on page 1437system variable is set to 1, this prompt is suppressed, and the
selected object is automatically converted to a polyline.
The conversion in both PEDIT and SPLINEDIT will obey the DELOBJ on page
1228 system variable.
Multiple Selection (PEDIT)
Quick Reference
Enables selection for more than one object.
If the selection set includes lines, arcs, or splines, the following prompt is
displayed:
List of Prompts
The following prompts are displayed.
Convert Lines, Arcs and Splines to polylines [Yes/No]? <Y>: Enter y or n or press
Enter
Specify a precision for spline conversion <10>: Enter a new precision value or
press Enter
The entered precision value affects all splines in the selection set. The precision
value is an integer between 0 and 99.
Multiple Selection (PEDIT) | 769