2011

DPI
Specifies the dots per inch for shaded and rendered views, up to the maximum
resolution of the current plotting device.
Plot Stamp
Controls the placement of a plot stamp on each layout and/or logs it to a file.
Plot stamp settings are specified in the Plot Stamp Settings dialog box on page
803, in which you can specify the information that you want applied to the
plot stamp, such as drawing name, date and time, plot scale, and so on.
Include Plot Stamp Turns on plot stamping for the layout.
Plot Stamp Settings Displays the
Plot Stamp Settings dialog box on page 803
when Include Plot Stamp is selected.
Print Options
Specifies options for lineweights, transparency, and the order in which objects
are plotted.
Print Object Lineweights
Specifies whether lineweights assigned to objects and layers are printed.
Print Transparency
Specifies whether object transparency is printed. This option should only be
used when printing drawings with transparent objects.
IMPORTANT For perfomance reasons, printing transparency is disabled by default.
To print transparent objects, check the Print Transparency option. This setting can
be overridden by the PLOTTRANSPARENCYOVERRIDE on page 1447 system variable.
By default, the system variable honors the setting in the Page Setup - Advanced
dialog box.
Print Paper Space Last
Prints model space geometry first. Paper space geometry is usually printed
before model space geometry.
Hide Paper Space Objects
Specifies whether the HIDE operation applies to objects in the paper space
viewport. This option is available only from a named (paper space) layout.
The effect of this setting is reflected in the output, but not in the display of
the layout.
Print Upside Down
Page Setup - Advanced Dialog Box | 761