2011

Table Of Contents
Sets the center of rotation in 3D Orbit view.
Summary
Starts 3D Orbit view and uses a center of rotation that you specify with your
pointing device. If you specify a point outside the current view, 3DORBITCTR
ignores the specified point and uses the default center of rotation.
3DORBITCTR overrides the AutoTarget option in the 3DORBIT command.
3DOSNAP
Quick Reference
See also:
Create Solids and Surfaces from Lines and Curves
Create Solids
Create Surfaces
Modify Surfaces
Use Grips to Modify Solids and Surfaces
Snap to Locations on Objects (Object Snaps)
Sets the object snap modes for 3D objects.
Access Methods
Menu: Tools Drafting Settings
Shortcut menu: Press Option while right-clicking in the drawing area and
click 3D Osnap Osnap Settings.
Toolbar: Status bar (expanded) 3D Object Snap
Summary
Displays the 3D Object Snap tab of the Drafting Settings dialog box on page
358. You can also set the 3D object snap settings with the
3DOSMODE on page
1173 system variable.
42 | Chapter 1 3D Commands