2011

Undo
Reverses operations performed in the current MVSETUP session.
Scale Viewports
Adjusts the zoom scale factor of the objects displayed in the viewports. The
zoom scale factor is a ratio between the scale of the border in paper space and
the scale of the drawing objects displayed in the viewports.
Interactively Selects one viewport at a time and displays the following prompts
for each:
For example, for an engineering drawing at a scale of 1:4, or quarter scale,
enter 1 for paper space units and 4 for model space units.
Uniform Sets the same scale factor for all viewports.
Options
Sets the MVSETUP preferences before you change your drawing.
Layer Specifies a layer on which to insert the title block.
Limits Specifies whether to reset the grid limits to the drawing extents after
a title block has been inserted.
Units Specifies whether the sizes and point locations are translated to inch
or millimeter paper units.
Xref Specifies whether the title block is inserted or externally referenced.
Title Block
Prepares paper space, orients the drawing by setting the origin, and creates a
drawing border and a title block.
Delete Objects
Deletes objects from paper space.
Origin
Relocates the origin point for this sheet.
Undo
Reverses operations performed in the current MVSETUP session.
Insert
Displays title block options.
Title Block to Load Inserts a border and a title block. Entering 0 or pressing
Enter inserts no border. Entering 1 through 13 creates a standard border of
the appropriate size. The list includes ANSI and DIN/ISO standard sheets.
706 | Chapter 13 M Commands