2011

Summary
You can create objects that represent half of a drawing, select them, and mirror
them across a specified line to create the other half.
NOTE By default, when you mirror a text object, the direction of the text is not
changed. Set the
MIRRTEXT on page 1412 system variable to 1 if you do want the
text to be reversed.
List of Prompts
The following prompts are displayed.
Select objects: Use an object selection method and press Enter to finish
Specify first point of mirror line: Specify a point
Specify second point of mirror line: Specify a point
The two specified points become the endpoints of a line about which the
selected objects are mirrored. For mirroring in 3D, this line defines a mirroring
plane perpendicular to the XY plane of the user coordinate system (UCS)
containing the mirror line.
Erase source objects? [Yes/No] <N>: Enter y or n, or press Enter
Yes Places the mirrored image into the drawing and erases the original objects.
No Places the mirrored image into the drawing and retains the original objects.
648 | Chapter 13 M Commands