2011

List of Prompts
The following prompts are displayed.
Mesh face(s) to extrude Specifies the mesh faces to extrude. Click one or
more faces to select them.
■
Height of extrusion
■ Direction
■ Path
■ Taper angle
Setting (Available only when you start the command before selecting faces)
Sets the style for extruding multiple adjacent mesh faces.
■ Join adjacent mesh faces when extruding Specifies whether adjacent mesh
faces are extruded singly or as a unit. (The difference between the two
options is not always apparent on a mesh that has not been smoothed.)
■ Yes. Extrudes all adjacent faces as a unit.
■ No. Extrudes each adjacent face separately.
Height of extrusion Extrudes mesh faces along the Z axis. Enter a positive
value to extrude the face along the positive Z axis. Enter a negative value to
extrude along the negative Z axis. Multiple mesh faces do not need to be
parallel to the same plane.
632 | Chapter 13 M Commands