2011

Tube radius Sets the radius of the profile that is swept around the mesh torus
path.
2Point (tube radius) Sets the radius of the profile of the tube based on the
distance between two points that you specify:
■ First point. Sets the first point of a two-point distance.
■ Second point. Sets the second point of a two-point distance.
Tube diameter Sets the diameter of the profile of the mesh torus tube.
Settings
Modifies the smoothness and tessellation values for the new mesh object.
Level of smoothness Sets the initial degree of smoothness, or roundness, to
be applied to the mesh. Enter 0 to eliminate smoothness. Enter a positive
integer up to 4 for increased degrees of smoothness. The value is retained for
the current drawing session.
This smoothness value is limited by the value of SMOOTHMESHMAXLEV.
Tessellation Enter a tessellation values (the number of faces) for each
dimension of a mesh primitive option.
MESHCAP
Quick Reference
See also:
■ Create and Close Mesh Gaps
Creates a mesh face that connects open edges.
Access Methods
Menu: Modify ➤ Mesh Editing ➤ Close Hole
Summary
You can close gaps in mesh objects by selecting the edges of the surrounding
mesh faces. For best results, the faces should be on the same plane.
MESHCAP | 627