2011

Specify two values: the size of the tube and the distance from the center of
the torus to the center of the tube.
Center point Sets the center point of the mesh torus.
■ Radius (torus)
■ Diameter (torus)
3P (three points) Sets the location, size, and rotation of the mesh torus by
specifying three points. The path of the tube passes through the specified
points:
■ First point. Sets the first point on the path of the tube.
■ Second point. Sets the second point on the path of the tube.
■ Third point. Sets the third point on the path of the tube.
■ Tube radius
■ 2Point (tube radius)
■ Diameter (tube)
MESH | 625