2011

■ Length
Center Sets the center point of the mesh wedge base.
■ Corner. Sets one corner of the mesh wedge base.
■
Height
■ 2Point (height)
■ Cube
■ Length
Cube Sets all edges of the mesh wedge base to be of equal length.
■
Length
Length Sets the length of the mesh wedge base along the X axis.
■
Width (not available for Cube)
Width Sets the width of the mesh box along the Y axis.
■
Height
■ 2Point (height)
Height Sets the height of the mesh wedge. Enter a positive value to draw the
height along the positive Z axis of the current UCS. Enter a negative value to
draw the height along the negative Z axis.
2Point (height) Defines the height of the mesh wedge by specifying the
distance between two points:
■ First point. Sets the first point of a two-point distance.
■ Second point. Sets the second point of a two-point distance.
Torus
Creates a 3D mesh primitive torus.
624 | Chapter 13 M Commands